In places such as cranes, hoists, or some university cargo transportation bundling, the use of wire ropes is relatively ordinary because of the strong tensile strength. Wire ropes are often used with pulleys during lifting or other use. Generally, customers with experience will find that when stainless steel wire ropes are used with pulleys, the parts of the steel wire ropes in contact with the pulleys are easily worn out. After long time use It will shorten the service life of stainless steel wire rope and pulley, how to solve it? Let me give you a brief introduction.

Stainless steel wire ropes and pulleys will suffer different degrees of wear after long-term friction. When the wire rope runs under a large load, the pulleys and stainless steel wire ropes wear seriously. If you want to reduce the wear between the two, change the stainless steel wire rope With the life of the pulley, lubricating oil can be often applied between the stainless steel wire rope and the pulley, or the contact area between the pulley and the stainless steel wire rope can be used to reduce the friction and wear between the two. This can help change the pulley and the pulley. The service life of stainless steel wire rope. In addition, it should be noted that overloading must not be used during operation, which will greatly increase the wear between the two.

Through these means, the friction between the stainless steel wire rope and the pulley can be reduced, but even if you do the above work, you need to check the wear of the stainless steel wire rope and the pulley regularly, and replace it in time to ensure the operation. The stability.